Bonding and sealing
Static mixing nozzles enable efficient and reliable mixing of...
Danger
Hazard statements
- H317 May cause an allergic skin reaction.
- H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled.
Precautionary statements
- P101 If medical advice is needed, have product container or label at hand.
- P102 Keep out of reach of children.
- P261 Avoid breathing vapours.
- P284 In case of inadequate ventilation wear respiratory protection.
- P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
- P311+P342 If experiencing respiratory symptoms: Call a POISON CENTER/doctor.
- P313+P333 If skin irritation or rash occurs: Get medical advice/attention.
- P305+338+351 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P501 Dispose of contents/container in accordance with local/national regulation.
Special labelling
- EUH204 Contains isocyanates. May produce an allergic reaction.
Adhesive and Sealant Based on MS Polymer
With its high initial adhesion, the product is suitable for wall and ceiling mounting of mirrors, curtain rails, lights, as well as heavy parts made of stone, concrete, glass, metal, wood, and plastic.
Once the adhesive and sealant has set, it remains permanently elastic, making it excellent for expansion joints. This is particularly important for outdoor use, to compensate for expansions and stresses in flooring and wall coverings, for example.
Whether it's acid rain, saltwater, chlorinated water, or household cleaners, the product impresses with high resistance and does not discolor. Dirt hardly sticks and can always be easily removed.
Thanks to UV resistance, joint sealings and adhesive spots do not become brittle or crumbly. Moreover, the adhesive and sealant is resistant to extreme cold down to -40 °C and heat up to +100 °C (briefly even up to +120 °C).
The product is resistant to mold and bacteria.
This adhesive and sealant is free of silicone, solvents, and contains no diisocyanates, which are often triggers for respiratory diseases.
Warning
Hazard statements
- H315 Causes skin irritation.
- H317 May cause an allergic skin reaction.
- H319 Causes serious eye irritation.
- H412 Harmful to aquatic life with long lasting effects.
Precautionary statements
- P101 If medical advice is needed, have product container or label at hand.
- P102 Keep out of reach of children.
- P280 Wear protective gloves/eye protection/face protection.
- P305+P338+P351 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P313+P333 If skin irritation or rash occurs: Get medical advice/attention.
- P313+P337 If eye irritation persists: Get medical advice/attention.
- P501 Dispose of contents/container in accordance with local/national regulation.
Special labelling
- EUH205 Contains epoxy constituents. May produce an allergic reaction.
MS Polymer-Based Adhesive and Sealant
Even without surface treatment with adhesion primers, excellent adhesion is achieved. The product can be used wet-on-wet, is overpaintable and compatible with paint.
Once the adhesive and sealant has cured, it remains permanently elastic, making it ideal for expansion joints. This is particularly important for outdoor use to accommodate expansions and tensions in floor and wall coverings.
Whether acid rain, salt water, chlorinated water, or household cleaners, the product impresses with its high resistance and does not discolor. Dirt does not stick and can always be easily removed.
Due to its UV resistance, joint seals and adhesive spots do not become brittle or crumbly. Moreover, the adhesive and sealant withstands extreme cold down to -40 °C and heat up to +100 °C (briefly even up to +130 °C).
The product is resistant to mold and bacteria. Therefore, it is also suitable for use in humid-warm environmental conditions.
This adhesive and sealant is free of silicone, solvents, and contains no diisocyanates, which are often triggers for respiratory diseases.
The adhesive and sealant can be processed on both dry and wet surfaces and even directly underwater.
MS Polymer-Based Adhesive and Sealant
Even without surface treatment with adhesion primers, excellent adhesion is achieved. The product can be used wet-on-wet, is overpaintable and compatible with paint.
Once the adhesive and sealant has cured, it remains permanently elastic, making it ideal for expansion joints. This is particularly important for outdoor use to accommodate expansions and tensions in floor and wall coverings.
Whether acid rain, salt water, chlorinated water, or household cleaners, the product impresses with its high resistance and does not discolor. Dirt does not stick and can always be easily removed.
Due to its UV resistance, joint seals and adhesive spots do not become brittle or crumbly. Moreover, the adhesive and sealant withstands extreme cold down to -40 °C and heat up to +100 °C (briefly even up to +130 °C).
The product is resistant to mold and bacteria. Therefore, it is also suitable for use in humid-warm environmental conditions.
This adhesive and sealant is free of silicone, solvents, and contains no diisocyanates, which are often triggers for respiratory diseases.
The adhesive and sealant can be processed on both dry and wet surfaces and even directly underwater.
MS Polymer-Based Adhesive and Sealant
Even without surface treatment with adhesion primers, excellent adhesion is achieved. The product can be used wet-on-wet, is overpaintable and compatible with paint.
Once the adhesive and sealant has cured, it remains permanently elastic, making it ideal for expansion joints. This is particularly important for outdoor use to accommodate expansions and tensions in floor and wall coverings.
Whether acid rain, salt water, chlorinated water, or household cleaners, the product impresses with its high resistance and does not discolor. Dirt does not stick and can always be easily removed.
Due to its UV resistance, joint seals and adhesive spots do not become brittle or crumbly. Moreover, the adhesive and sealant withstands extreme cold down to -40 °C and heat up to +100 °C (briefly even up to +130 °C).
The product is resistant to mold and bacteria. Therefore, it is also suitable for use in humid-warm environmental conditions.
This adhesive and sealant is free of silicone, solvents, and contains no diisocyanates, which are often triggers for respiratory diseases.
The adhesive and sealant can be processed on both dry and wet surfaces and even directly underwater.
Unique Formula Identifier
- UFI: 26P8-MX1T-SE9G-9F5W
Danger
Hazard statements
- H317 May cause an allergic skin reaction.
- H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled.
Precautionary statements
- P101 If medical advice is needed, have product container or label at hand.
- P102 Keep out of reach of children.
- P261 Avoid breathing vapours.
- P284 In case of inadequate ventilation wear respiratory protection.
- P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
- P311+P342 If experiencing respiratory symptoms: Call a POISON CENTER/doctor.
- P313+P333 If skin irritation or rash occurs: Get medical advice/attention.
- P305+338+351 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P501 Dispose of contents/container in accordance with local/national regulation.
Special labelling
- EUH204 Contains isocyanates. May produce an allergic reaction.
MS Polymer-Based Adhesive and Sealant
Even without surface treatment with adhesion primers, excellent adhesion is achieved. The product can be used wet-on-wet, is overpaintable and compatible with paint.
Once the adhesive and sealant has cured, it remains permanently elastic, making it ideal for expansion joints. This is particularly important for outdoor use to accommodate expansions and tensions in floor and wall coverings.
Whether acid rain, salt water, chlorinated water, or household cleaners, the product impresses with its high resistance and does not discolor. Dirt does not stick and can always be easily removed.
Due to its UV resistance, joint seals and adhesive spots do not become brittle or crumbly. Moreover, the adhesive and sealant withstands extreme cold down to -40 °C and heat up to +100 °C (briefly even up to +130 °C).
The product is resistant to mold and bacteria. Therefore, it is also suitable for use in humid-warm environmental conditions.
This adhesive and sealant is free of silicone, solvents, and contains no diisocyanates, which are often triggers for respiratory diseases.
The adhesive and sealant can be processed on both dry and wet surfaces and even directly underwater.
Adheres and seals even directly under water
The adhesive and sealant can be conventionally applied on dry, but also on wet surfaces and even directly under water. It has been developed for installations and repairs on brick or concrete swimming pools, swimming pools, whether built-in pools or above-ground pools, as well as whirlpools, paddling pools, steel wall pools, garden ponds, aquariums, and similar applications.
Even without a surface treatment with adhesion primers, excellent adhesion is achieved. The product can be applied wet on wet, is overpaintable and compatible with paint.
After the adhesive and sealant has set, it remains permanently elastic, making it excellent for expansion joints. This is especially important for outdoor applications, to compensate for example, expansions and tensions of floor and wall coverings.
Whether it's acid rain weathering, saltwater, chlorinated water, or household cleaners, the product impresses with high resistance and does not discolor. Dirt practically does not stick to it and can always be removed effortlessly.
Due to the UV resistance, joint sealings and adhesive points do not become brittle or crumbly. In addition, the adhesive and sealant is resistant to extreme cold down to -40 °C and heat up to +100 °C (briefly even up to +130 °C).
The product is resistant to mold and bacteria. Therefore, it is also suitable for use under humid-warm environmental conditions.
This adhesive and sealant is free of silicone, solvents, and contains no diisocyanates, which are often triggers for respiratory diseases.
Unique Formula Identifier
- UFI: E2Q0-E02H-K001-2CK1
Gefahr
Gefahrenhinweise
- H222 Extrem entzündbares Aerosol.
- H229 Behälter steht unter Druck: Kann bei Erwärmung bersten.
- H315 Verursacht Hautreizungen.
- H319 Verursacht schwere Augenreizung.
- H336 Kann Schläfrigkeit und Benommenheit verursachen.
- H411 Giftig für Wasserorganismen, mit langfristiger Wirkung.
Sicherheitshinweise
- P101 Ist ärztlicher Rat erforderlich, Verpackung oder Kennzeichnungsetikett bereithalten.
- P102 Darf nicht in die Hände von Kindern gelangen.
- P210 Von Hitze, heißen Oberflächen, Funken, offenen Flammen und anderen Zündquellen fernhalten. Nicht rauchen.
- P211 Nicht gegen offene Flamme oder andere Zündquelle sprühen.
- P251 Nicht durchstechen oder verbrennen, auch nicht nach Gebrauch.
- P271 Nur im Freien oder in gut belüfteten Räumen verwenden.
- P273 Freisetzung in die Umwelt vermeiden.
- P391 Verschüttete Mengen aufnehmen.
- P405 Sofort Unter Verschluss aufbewahren.
- P410+P412 Vor Sonnenbestrahlung schützen und nicht Temperaturen über 50 °C/122 °F aussetzen.
- P501 Inhalt/Behälter der Problemabfallentsorgung zuführen.
Besondere Kennzeichnung bestimmter Gemische
- EUH066 Wiederholter Kontakt kann zu spröder oder rissiger Haut führen.
Gefahrbestimmende Komponenten zur Etikettierung
- Enthält: Kohlenwasserstoffe, C7, n-Alkane, Isoalkane, Cyclene; Kohlenwasserstoffe, C7-C9, n-Alkane, Isoalkane, Cyclene; Kohlenwasserstoffe, C6-C7, n-Alkane, Isoalkane, Cyclene, < 5 % n-Hexan; Kohlenwasserstoffe, C9, Aromaten.
MS Polymer-Based Adhesive and Sealant
Even without surface treatment with adhesion primers, excellent adhesion is achieved. The product can be used wet-on-wet, is overpaintable and compatible with paint.
Once the adhesive and sealant has cured, it remains permanently elastic, making it ideal for expansion joints. This is particularly important for outdoor use to accommodate expansions and tensions in floor and wall coverings.
Whether acid rain, salt water, chlorinated water, or household cleaners, the product impresses with its high resistance and does not discolor. Dirt does not stick and can always be easily removed.
Due to its UV resistance, joint seals and adhesive spots do not become brittle or crumbly. Moreover, the adhesive and sealant withstands extreme cold down to -40 °C and heat up to +100 °C (briefly even up to +130 °C).
The product is resistant to mold and bacteria. Therefore, it is also suitable for use in humid-warm environmental conditions.
This adhesive and sealant is free of silicone, solvents, and contains no diisocyanates, which are often triggers for respiratory diseases.
The adhesive and sealant can be processed on both dry and wet surfaces and even directly underwater.
Heat-Resistant Adhesive and Sealant
The product's heat resistance ranges from -40 °C to +100 °C, and even up to +200 °C for short periods. This extends its application to heating and stove construction, as well as to metal parts that are bonded and then finished in a curing oven with a powder coating.
Excellent adhesion is achieved even without surface treatment with adhesion primers. The product can be applied wet-on-wet, is paintable, and compatible with coatings.
Once the adhesive and sealant has set, it remains permanently elastic, making it excellent for expansion joints. This is especially important for outdoor use, for example, to compensate for expansions and tensions of floor and wall coverings.
Whether it's acid rain weathering, saltwater, chlorinated water, or household cleaners, the product impresses with its high resistance and does not discolor. Dirt practically does not stick to it and can always be easily removed.
Due to its UV resistance, joint sealants and adhesive spots do not become brittle or crumbly.
The product is resistant to mold and bacteria. Therefore, it is also suitable for use under humid-warm environmental conditions.
This adhesive and sealant is free from silicone, solvents, and contains no diisocyanates, which are often triggers for respiratory diseases.
Komponente A
- Enthält Dibenzoylperoxid; Reaktionsprodukt: Bisphenol-A-Epichlorhydrinharze mit durchschnittlichem Molekulargewicht ≤ 700.
Unique Formula Identifier
- UFI: E019-DX0U-CE9U-NFM1
Achtung
Gefahrenhinweise
- H315 Verursacht Hautreizungen.
- H317 Kann allergische Hautreaktionen verursachen.
- H319 Verursacht schwere Augenreizung.
- H410 Sehr giftig für Wasserorganismen mit langfristiger Wirkung.
Sicherheitshinweise
- Aufgrund einer technisch bedingten Begrenzung der maximalen Textlänge können die umfangreichen Hinweise an dieser Stelle nicht vollständig dargestellt werden. Fehlende Informationen stehen im Sicherheitsdatenblatt zur Verfügung.
Besondere Kennzeichnung
- EUH205 Enthält epoxidhaltige Verbindungen. Kann allergische Reaktionen hervorrufen.
Komponente B
- Enthält: Methylmethacrylat; Methacrylsäure.
Unique Formula Identifier
- UFI: W1W4-M4ED-RRKU-DA8X
Gefahr
Gefahrenhinweise
- H225 Flüssigkeit und Dampf leicht entzündbar.
- H315 Verursacht Hautreizungen.
- H317 Kann allergische Hautreaktionen verursachen.
- H319 Verursacht schwere Augenreizung.
- H335 Kann die Atemwege reizen.
Sicherheitshinweise
- Aufgrund einer technisch bedingten Begrenzung der maximalen Textlänge können die umfangreichen Hinweise an dieser Stelle nicht vollständig dargestellt werden. Fehlende Informationen stehen im Sicherheitsdatenblatt zur Verfügung.
Component A
- UFI: X319-VXQ7-PE9A-9T63
Danger
Hazard statements
- H225 Highly flammable liquid and vapour.
- H314 Causes severe skin burns and eye damage.
- H317 May cause an allergic skin reaction.
- H335 May cause respiratory irritation.
- H412 Harmful to aquatic life with long lasting effects.
Precautionary statements
- P101 If medical advice is needed, have product container or label at hand.
- P102 Keep out of reach of children.
- P280 Wear protective gloves.
- P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P405 Store locked up.
- P501 Dispose of contents/container in accordance with local/national regulation.
Hazard components for labelling
- Contains: Methyl methacrylate; Methyl 2-methylprop-2-enoate; Methyl 2-methylpropenoate; Methacrylic acid; 2-Methylpropenoic acid; p-Toluenesulfonyl chloride; alpha,alpha-Dimethylbenzyl hydroperoxide; Cumene hydroperoxide.
Component B
- UFI: RPE4-3453-MRK6-X9Y5
Danger
Hazard statements
- H225 Highly flammable liquid and vapour.
- H315 Causes skin irritation.
- H317 May cause an allergic skin reaction.
- H335 May cause respiratory irritation.
- H412 Harmful to aquatic life with long lasting effects.
Precautionary statements
- P101 If medical advice is needed, have product container or label at hand.
- P102 Keep out of reach of children.
- P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
- P280 Wear protective gloves.
- P405 Store locked up.
- P501 Dispose of contents/container in accordance with local/national regulation.
Hazard components for labelling
- Contains: Methyl methacrylate; Methyl 2-methylprop-2-enoate; Methyl 2-methylpropenoate.
Component A
- UFI: X319-VXQ7-PE9A-9T63
Danger
Hazard statements
- H225 Highly flammable liquid and vapour.
- H314 Causes severe skin burns and eye damage.
- H317 May cause an allergic skin reaction.
- H335 May cause respiratory irritation.
- H412 Harmful to aquatic life with long lasting effects.
Precautionary statements
- P101 If medical advice is needed, have product container or label at hand.
- P102 Keep out of reach of children.
- P280 Wear protective gloves.
- P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P405 Store locked up.
- P501 Dispose of contents/container in accordance with local/national regulation.
Hazard components for labelling
- Contains: Methyl methacrylate; Methyl 2-methylprop-2-enoate; Methyl 2-methylpropenoate; Methacrylic acid; 2-Methylpropenoic acid; p-Toluenesulfonyl chloride; alpha,alpha-Dimethylbenzyl hydroperoxide; Cumene hydroperoxide.
Component B
- UFI: RPE4-3453-MRK6-X9Y5
Danger
Hazard statements
- H225 Highly flammable liquid and vapour.
- H315 Causes skin irritation.
- H317 May cause an allergic skin reaction.
- H335 May cause respiratory irritation.
- H412 Harmful to aquatic life with long lasting effects.
Precautionary statements
- P101 If medical advice is needed, have product container or label at hand.
- P102 Keep out of reach of children.
- P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
- P280 Wear protective gloves.
- P405 Store locked up.
- P501 Dispose of contents/container in accordance with local/national regulation.
Hazard components for labelling
- Contains: Methyl methacrylate; Methyl 2-methylprop-2-enoate; Methyl 2-methylpropenoate.
Komponente A
- Enthält Dibenzoylperoxid; Reaktionsprodukt: Bisphenol-A-Epichlorhydrinharze mit durchschnittlichem Molekulargewicht ≤ 700.
Unique Formula Identifier
- UFI: E019-DX0U-CE9U-NFM1
Achtung
Gefahrenhinweise
- H315 Verursacht Hautreizungen.
- H317 Kann allergische Hautreaktionen verursachen.
- H319 Verursacht schwere Augenreizung.
- H410 Sehr giftig für Wasserorganismen mit langfristiger Wirkung.
Sicherheitshinweise
- Aufgrund einer technisch bedingten Begrenzung der maximalen Textlänge können die umfangreichen Hinweise an dieser Stelle nicht vollständig dargestellt werden. Fehlende Informationen stehen im Sicherheitsdatenblatt zur Verfügung.
Besondere Kennzeichnung
- EUH205 Enthält epoxidhaltige Verbindungen. Kann allergische Reaktionen hervorrufen.
Komponente B
- Enthält: Methylmethacrylat; Methacrylsäure.
Unique Formula Identifier
- UFI: W1W4-M4ED-RRKU-DA8X
Gefahr
Gefahrenhinweise
- H225 Flüssigkeit und Dampf leicht entzündbar.
- H315 Verursacht Hautreizungen.
- H317 Kann allergische Hautreaktionen verursachen.
- H319 Verursacht schwere Augenreizung.
- H335 Kann die Atemwege reizen.
Sicherheitshinweise
- Aufgrund einer technisch bedingten Begrenzung der maximalen Textlänge können die umfangreichen Hinweise an dieser Stelle nicht vollständig dargestellt werden. Fehlende Informationen stehen im Sicherheitsdatenblatt zur Verfügung.
Komponente A
- Enthält Dibenzoylperoxid; Reaktionsprodukt: Bisphenol-A-Epichlorhydrinharze mit durchschnittlichem Molekulargewicht ≤ 700.
Unique Formula Identifier
- UFI: WW0A-KXGR-NE90-SCD8
Achtung
Gefahrenhinweise
- H315 Verursacht Hautreizungen.
- H317 Kann allergische Hautreaktionen verursachen.
- H319 Verursacht schwere Augenreizung.
- H410 Sehr giftig für Wasserorganismen mit langfristiger Wirkung.
Sicherheitshinweise
- Aufgrund einer technisch bedingten Begrenzung der maximalen Textlänge können die umfangreichen Hinweise an dieser Stelle nicht vollständig dargestellt werden. Fehlende Informationen stehen im Sicherheitsdatenblatt zur Verfügung.
Besondere Kennzeichnung
- EUH205 Enthält epoxidhaltige Verbindungen. Kann allergische Reaktionen hervorrufen.
Komponente B
- Enthält: Methylmethacrylat; Methacrylsäure.
Unique Formula Identifier
- UFI: NXV5-T4WA-1RK0-H725
Gefahr
Gefahrenhinweise
- H225 Flüssigkeit und Dampf leicht entzündbar.
- H315 Verursacht Hautreizungen.
- H317 Kann allergische Hautreaktionen verursachen.
- H319 Verursacht schwere Augenreizung.
- H335 Kann die Atemwege reizen.
Sicherheitshinweise
- Aufgrund einer technisch bedingten Begrenzung der maximalen Textlänge können die umfangreichen Hinweise an dieser Stelle nicht vollständig dargestellt werden. Fehlende Informationen stehen im Sicherheitsdatenblatt zur Verfügung.
Adheres and seals even directly under water
The adhesive and sealant can be conventionally applied on dry, but also on wet surfaces and even directly under water. It has been developed for installations and repairs on brick or concrete swimming pools, swimming pools, whether built-in pools or above-ground pools, as well as whirlpools, paddling pools, steel wall pools, garden ponds, aquariums, and similar applications.
Even without a surface treatment with adhesion primers, excellent adhesion is achieved. The product can be applied wet on wet, is overpaintable and compatible with paint.
After the adhesive and sealant has set, it remains permanently elastic, making it excellent for expansion joints. This is especially important for outdoor applications, to compensate for example, expansions and tensions of floor and wall coverings.
Whether it's acid rain weathering, saltwater, chlorinated water, or household cleaners, the product impresses with high resistance and does not discolor. Dirt practically does not stick to it and can always be removed effortlessly.
Due to the UV resistance, joint sealings and adhesive points do not become brittle or crumbly. In addition, the adhesive and sealant is resistant to extreme cold down to -40 °C and heat up to +100 °C (briefly even up to +130 °C).
The product is resistant to mold and bacteria. Therefore, it is also suitable for use under humid-warm environmental conditions.
This adhesive and sealant is free of silicone, solvents, and contains no diisocyanates, which are often triggers for respiratory diseases.
