Offers
Klebt und dichtet Metalle und mehr
Der Kleb- und Dichtstoff ist metallisch glänzend. Nach der Aushärtung sehen Klebestellen und Fugen aus wie geschweißt.
Selbst ohne eine Oberflächenbehandlung mit Haftprimern wird eine hervorragende Haftung erreicht. Das Produkt ist nass auf nass anwendbar, überlackierbar und anstrichverträglich.
Nachdem der Kleb- und Dichtstoff abgebunden hat, bleibt er dauerelastisch und eignet sich somit hervorragend für Dehnungsfugen. Dies ist insbesondere bei Anwendung im Außenbereich wichtig, um beispielsweise Dehnungen und Spannungen von Boden- und Wandbelägen auszugleichen.
Egal ob regensaure Verwitterung, Salzwasser, Chlorwasser oder Haushaltsreiniger, das Produkt überzeugt mit hoher Beständigkeit und verfärbt sich nicht. Schmutz haftet praktisch nicht an und lässt sich jederzeit mühelos entfernen.
Durch die UV-Beständigkeit werden Fugenabdichtungen und Klebestellen nicht brüchig oder bröselig. Zudem ist der Kleb- und Dichtstoff beständig gegen extreme Kälte bis -40 °C und Wärme bis +100 °C.
Das Produkt ist resistent gegen Schimmel und Bakterien. Daher eignet es sich auch für den Einsatz unter feucht-warmen Umgebungsbedingungen.
Dieser Kleb- und Dichtstoff ist frei von Silikon, Lösemitteln und enthält keine Diisocyanate, die häufig Auslöser von Atemwegserkrankungen sind.
Unique Formula Identifier
- UFI: 8M10-8C22-8P0C-SQ9N
Gefahr
Gefahrenhinweise
- H222 Extrem entzündbares Aerosol.
- H229 Behälter steht unter Druck: Kann bei Erwärmung bersten.
- H315 Verursacht Hautreizungen.
- H317 Kann allergische Hautreaktionen verursachen.
- H319 Verursacht schwere Augenreizung.
- H336 Kann Schläfrigkeit und Benommenheit verursachen.
- H412 Schädlich für Wasserorganismen, mit langfristiger Wirkung.
Sicherheitshinweise
- P210 Von Hitze, heißen Oberflächen, Funken, offenen Flammen und anderen Zündquellen fernhalten. Nicht rauchen.
- P211 Nicht gegen offene Flamme oder andere Zündquelle sprühen.
- P251 Nicht durchstechen oder verbrennen, auch nicht nach Gebrauch.
- P271 Nur im Freien oder in gut belüfteten Räumen verwenden.
- P280 Schutzhandschuhe/Schutzkleidung/Augenschutz/Gesichtsschutz tragen.
- P410+P412 Vor Sonnenbestrahlung schützen und nicht Temperaturen über 50 °C/122 °F aussetzen.
Gefahrbestimmende Komponenten zur Etikettierung
- Enthält: Aceton; Propan-2-on; Propanon; Kohlenwasserstoffe, C6, Isoalkane, < 5 % n-Hexan.
Unique Formula Identifier
- UFI: 2FK0-502U-Q008-913A
Warning
Hazard statements
- H315 Causes skin irritation.
- H319 Causes serious eye irritation.
- H335 May cause respiratory irritation.
Precautionary statements
- P102 Keep out of reach of children.
- P261 Avoid breathing mist/vapours/spray.
- P271 Use only outdoors or in a well-ventilated area.
- P305+P351+P338 If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P312 Call a poison centre/doctor if you feel unwell.
- P405 Store locked up.
- P501 Dispose of contents/container to hazardous or special waste collection point.
Special labelling
- EUH202 Cyanoacrylate. Danger. Bonds skin and eyes in seconds. Keep out of the reach of children.
Unique Formula Identifier
- UFI: 2FK0-502U-Q008-913A
Warning
Hazard statements
- H315 Causes skin irritation.
- H319 Causes serious eye irritation.
- H335 May cause respiratory irritation.
Precautionary statements
- P102 Keep out of reach of children.
- P261 Avoid breathing mist/vapours/spray.
- P271 Use only outdoors or in a well-ventilated area.
- P305+P351+P338 If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P312 Call a poison centre/doctor if you feel unwell.
- P405 Store locked up.
- P501 Dispose of contents/container to hazardous or special waste collection point.
Special labelling
- EUH202 Cyanoacrylate. Danger. Bonds skin and eyes in seconds. Keep out of the reach of children.
Unique Formula Identifier
- UFI: 2FK0-502U-Q008-913A
Warning
Hazard statements
- H315 Causes skin irritation.
- H319 Causes serious eye irritation.
- H335 May cause respiratory irritation.
Precautionary statements
- P102 Keep out of reach of children.
- P261 Avoid breathing mist/vapours/spray.
- P271 Use only outdoors or in a well-ventilated area.
- P305+P351+P338 If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P312 Call a poison centre/doctor if you feel unwell.
- P405 Store locked up.
- P501 Dispose of contents/container to hazardous or special waste collection point.
Special labelling
- EUH202 Cyanoacrylate. Danger. Bonds skin and eyes in seconds. Keep out of the reach of children.
MS Polymer-Based Adhesive and Sealant
Even without surface treatment with adhesion primers, excellent adhesion is achieved. The product can be used wet-on-wet, is overpaintable and compatible with paint.
Once the adhesive and sealant has cured, it remains permanently elastic, making it ideal for expansion joints. This is particularly important for outdoor use to accommodate expansions and tensions in floor and wall coverings.
Whether acid rain, salt water, chlorinated water, or household cleaners, the product impresses with its high resistance and does not discolor. Dirt does not stick and can always be easily removed.
Due to its UV resistance, joint seals and adhesive spots do not become brittle or crumbly. Moreover, the adhesive and sealant withstands extreme cold down to -40 °C and heat up to +100 °C (briefly even up to +130 °C).
The product is resistant to mold and bacteria. Therefore, it is also suitable for use in humid-warm environmental conditions.
This adhesive and sealant is free of silicone, solvents, and contains no diisocyanates, which are often triggers for respiratory diseases.
The adhesive and sealant can be processed on both dry and wet surfaces and even directly underwater.
Adheres and seals even directly under water
The adhesive and sealant can be conventionally applied on dry, but also on wet surfaces and even directly under water. It has been developed for installations and repairs on brick or concrete swimming pools, swimming pools, whether built-in pools or above-ground pools, as well as whirlpools, paddling pools, steel wall pools, garden ponds, aquariums, and similar applications.
Even without a surface treatment with adhesion primers, excellent adhesion is achieved. The product can be applied wet on wet, is overpaintable and compatible with paint.
After the adhesive and sealant has set, it remains permanently elastic, making it excellent for expansion joints. This is especially important for outdoor applications, to compensate for example, expansions and tensions of floor and wall coverings.
Whether it's acid rain weathering, saltwater, chlorinated water, or household cleaners, the product impresses with high resistance and does not discolor. Dirt practically does not stick to it and can always be removed effortlessly.
Due to the UV resistance, joint sealings and adhesive points do not become brittle or crumbly. In addition, the adhesive and sealant is resistant to extreme cold down to -40 °C and heat up to +100 °C (briefly even up to +130 °C).
The product is resistant to mold and bacteria. Therefore, it is also suitable for use under humid-warm environmental conditions.
This adhesive and sealant is free of silicone, solvents, and contains no diisocyanates, which are often triggers for respiratory diseases.
Adheres and seals even directly under water
The adhesive and sealant can be conventionally applied on dry, but also on wet surfaces and even directly under water. It has been developed for installations and repairs on brick or concrete swimming pools, swimming pools, whether built-in pools or above-ground pools, as well as whirlpools, paddling pools, steel wall pools, garden ponds, aquariums, and similar applications.
Even without a surface treatment with adhesion primers, excellent adhesion is achieved. The product can be applied wet on wet, is overpaintable and compatible with paint.
After the adhesive and sealant has set, it remains permanently elastic, making it excellent for expansion joints. This is especially important for outdoor applications, to compensate for example, expansions and tensions of floor and wall coverings.
Whether it's acid rain weathering, saltwater, chlorinated water, or household cleaners, the product impresses with high resistance and does not discolor. Dirt practically does not stick to it and can always be removed effortlessly.
Due to the UV resistance, joint sealings and adhesive points do not become brittle or crumbly. In addition, the adhesive and sealant is resistant to extreme cold down to -40 °C and heat up to +100 °C (briefly even up to +130 °C).
The product is resistant to mold and bacteria. Therefore, it is also suitable for use under humid-warm environmental conditions.
This adhesive and sealant is free of silicone, solvents, and contains no diisocyanates, which are often triggers for respiratory diseases.
