Bestseller
Unique Formula Identifier
- UFI: HEJ8-AXPC-9E9Q-6EJ2
Danger
Hazard statements
- H222 Extremely flammable aerosol.
- H229 Pressurised container: May burst if heated.
- H319 Causes serious eye irritation.
- H336 May cause drowsiness or dizziness.
Precautionary statements
- P101 If medical advice is needed, have product container or label at hand.
- P102 Keep out of reach of children.
- P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
- P211 Do not spray on an open flame or other ignition source.
- P251 Do not pierce or burn, even after use.
- P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.
Special labelling
- EUH066 Repeated exposure may cause skin dryness or cracking.
Hazardous components for labeling
- Contains: Acetone; propan-2-one; propanone
Unique Formula Identifier
- UFI: VGQ8-6XDS-CE9W-7JWV
Danger
Hazard statements
- H222 Extremely flammable aerosol.
- H229 Pressurised container: May burst if heated.
- H315 Causes skin irritation.
- H319 Causes serious eye irritation.
- H336 May cause drowsiness or dizziness.
- H410 Very toxic to aquatic life with long-lasting effects.
Precautionary statements
- P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
- P211 Do not spray on an open flame or other ignition source.
- P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
- P273 Avoid release to the environment.
- P280 Wear protective gloves/protective clothing/eye protection/face protection.
- P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P312 Call a POISON CENTER/doctor if you feel unwell.
- P410+P412 Protect from sunlight. Do not expose to temperatures exceeding +50 °C/+122 °F.
Special labelling
- EUH018 In use may form flammable/explosive vapour-air mixture.
- EUH208 Contains Zinc bis(dibutyldithiocarbamate). May produce an allergic reaction.
Hazard-determining components for labelling
- Contains: Cyclohexane; Naphtha (petroleum), hydrotreated light; Acetone.
Unique Formula Identifier
- UFI: 2FK0-502U-Q008-913A
Warning
Hazard statements
- H315 Causes skin irritation.
- H319 Causes serious eye irritation.
- H335 May cause respiratory irritation.
Precautionary statements
- P102 Keep out of reach of children.
- P261 Avoid breathing mist/vapours/spray.
- P271 Use only outdoors or in a well-ventilated area.
- P305+P351+P338 If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P312 Call a poison centre/doctor if you feel unwell.
- P405 Store locked up.
- P501 Dispose of contents/container to hazardous or special waste collection point.
Special labelling
- EUH202 Cyanoacrylate. Danger. Bonds skin and eyes in seconds. Keep out of the reach of children.
Unique Formula Identifier
- UFI: 2FK0-502U-Q008-913A
Warning
Hazard statements
- H315 Causes skin irritation.
- H319 Causes serious eye irritation.
- H335 May cause respiratory irritation.
Precautionary statements
- P102 Keep out of reach of children.
- P261 Avoid breathing mist/vapours/spray.
- P271 Use only outdoors or in a well-ventilated area.
- P305+P351+P338 If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P312 Call a poison centre/doctor if you feel unwell.
- P405 Store locked up.
- P501 Dispose of contents/container to hazardous or special waste collection point.
Special labelling
- EUH202 Cyanoacrylate. Danger. Bonds skin and eyes in seconds. Keep out of the reach of children.
Unique Formula Identifier
- UFI: 2FK0-502U-Q008-913A
Warning
Hazard statements
- H315 Causes skin irritation.
- H319 Causes serious eye irritation.
- H335 May cause respiratory irritation.
Precautionary statements
- P102 Keep out of reach of children.
- P261 Avoid breathing mist/vapours/spray.
- P271 Use only outdoors or in a well-ventilated area.
- P305+P351+P338 If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P312 Call a poison centre/doctor if you feel unwell.
- P405 Store locked up.
- P501 Dispose of contents/container to hazardous or special waste collection point.
Special labelling
- EUH202 Cyanoacrylate. Danger. Bonds skin and eyes in seconds. Keep out of the reach of children.
Unique Formula Identifier
- UFI: 2FK0-502U-Q008-913A
Warning
Hazard statements
- H315 Causes skin irritation.
- H319 Causes serious eye irritation.
- H335 May cause respiratory irritation.
Precautionary statements
- P102 Keep out of reach of children.
- P261 Avoid breathing mist/vapours/spray.
- P271 Use only outdoors or in a well-ventilated area.
- P305+P351+P338 If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P312 Call a poison centre/doctor if you feel unwell.
- P405 Store locked up.
- P501 Dispose of contents/container to hazardous or special waste collection point.
Special labelling
- EUH202 Cyanoacrylate. Danger. Bonds skin and eyes in seconds. Keep out of the reach of children.
Unique Formula Identifier
- UFI: TYP8-5X8D-HE9X-8HEG
Danger
Hazard statements
- H222 Extremely flammable aerosol.
- H229 Pressurised container: May burst if heated.
- H315 Causes skin irritation.
- H317 May cause an allergic skin reaction.
- H319 Causes serious eye irritation.
- H336 May cause drowsiness or dizziness.
- H412 Harmful to aquatic life with long lasting effects.
Precautionary statements
- P101 If medical advice is needed, have product container or label at hand.
- P102 Keep out of reach of children.
- P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
- P211 Do not spray on an open flame or other ignition source.
- P251 Do not pierce or burn, even after use.
- P271 Use only outdoors or in a well-ventilated area.
- P280 Wear protective gloves/protective clothing/eye protection/face protection.
- P410+412 Protect from sunlight. Do not expose to temperatures exceeding +50 °C/+122 °F.
- P501 Dispose of contents/container in accordance with local/national regulations.
Hazard-determining components for labeling
- Contains: Hydrocarbons, C6-C7, n-alkanes, isoalkanes, cyclenes, < 5 % n-hexane; rosin; acetone; propan-2-one; propanone.
MS Polymer-Based Adhesive and Sealant
Even without surface treatment with adhesion primers, excellent adhesion is achieved. The product can be used wet-on-wet, is overpaintable and compatible with paint.
Once the adhesive and sealant has cured, it remains permanently elastic, making it ideal for expansion joints. This is particularly important for outdoor use to accommodate expansions and tensions in floor and wall coverings.
Whether acid rain, salt water, chlorinated water, or household cleaners, the product impresses with its high resistance and does not discolor. Dirt does not stick and can always be easily removed.
Due to its UV resistance, joint seals and adhesive spots do not become brittle or crumbly. Moreover, the adhesive and sealant withstands extreme cold down to -40 °C and heat up to +100 °C (briefly even up to +130 °C).
The product is resistant to mold and bacteria. Therefore, it is also suitable for use in humid-warm environmental conditions.
This adhesive and sealant is free of silicone, solvents, and contains no diisocyanates, which are often triggers for respiratory diseases.
The adhesive and sealant can be processed on both dry and wet surfaces and even directly underwater.
MS Polymer-Based Adhesive and Sealant
Even without surface treatment with adhesion primers, excellent adhesion is achieved. The product can be used wet-on-wet, is overpaintable and compatible with paint.
Once the adhesive and sealant has cured, it remains permanently elastic, making it ideal for expansion joints. This is particularly important for outdoor use to accommodate expansions and tensions in floor and wall coverings.
Whether acid rain, salt water, chlorinated water, or household cleaners, the product impresses with its high resistance and does not discolor. Dirt does not stick and can always be easily removed.
Due to its UV resistance, joint seals and adhesive spots do not become brittle or crumbly. Moreover, the adhesive and sealant withstands extreme cold down to -40 °C and heat up to +100 °C (briefly even up to +130 °C).
The product is resistant to mold and bacteria. Therefore, it is also suitable for use in humid-warm environmental conditions.
This adhesive and sealant is free of silicone, solvents, and contains no diisocyanates, which are often triggers for respiratory diseases.
The adhesive and sealant can be processed on both dry and wet surfaces and even directly underwater.
MS Polymer-Based Adhesive and Sealant
Even without surface treatment with adhesion primers, excellent adhesion is achieved. The product can be used wet-on-wet, is overpaintable and compatible with paint.
Once the adhesive and sealant has cured, it remains permanently elastic, making it ideal for expansion joints. This is particularly important for outdoor use to accommodate expansions and tensions in floor and wall coverings.
Whether acid rain, salt water, chlorinated water, or household cleaners, the product impresses with its high resistance and does not discolor. Dirt does not stick and can always be easily removed.
Due to its UV resistance, joint seals and adhesive spots do not become brittle or crumbly. Moreover, the adhesive and sealant withstands extreme cold down to -40 °C and heat up to +100 °C (briefly even up to +130 °C).
The product is resistant to mold and bacteria. Therefore, it is also suitable for use in humid-warm environmental conditions.
This adhesive and sealant is free of silicone, solvents, and contains no diisocyanates, which are often triggers for respiratory diseases.
The adhesive and sealant can be processed on both dry and wet surfaces and even directly underwater.