WIKO® HAND CARE is a silicone-free, moisturizing skin care lotion designed for professional use in workshops, industry and trade. The high-quality formula protects the skin from drying out, strengthens the natural skin barrier and soothes stressed or irritated skin. At the same time it supports skin regeneration and, thanks to beeswax, forms a breathable protective layer without clogging pores. The lotion absorbs quickly, leaves no greasy film and is suitable for hands and body – even with frequent use.

• ✅ Intensive skin care: Protects the skin from drying out and supports natural regeneration.
• ✅ Strengthens the skin barrier: Nourishes stressed skin and smooths dry areas.
• ✅ With beeswax: Forms a breathable protective layer without clogging pores.
• ✅ Fast absorbing: Leaves no greasy film or residue.
• ✅ Silicone- and fragrance-free: Dermatologically tested and suitable for frequent use.
• ✅ For hands and body: Ideal for skin care after work or after hand cleaning.
• ✅ Highly economical: A small amount is sufficient for effective skin care.

Everglue Silicate Filler is a high-quality, fine-crystalline granulate, perfect for filling holes, joints, and gaps. When combined with cyanoacrylate superglues, it's ideal for repair and modeling work. It is waterproof, sandable, paintable, and resistant to temperature and chemicals.

• ✅ Versatile Use: Perfect for repairs on metal, wood, porcelain, ceramic, plastic, and rubber.
• ✅ Easy to Apply: Simple application for quick results.
• ✅ High Durability: Waterproof, sandable, and paintable.
• ✅ Temperature and Chemical Resistant: Ideal for demanding applications.

MS Polymer-Based Adhesive and Sealant

Even without surface treatment with adhesion primers, excellent adhesion is achieved. The product can be used wet-on-wet, is overpaintable and compatible with paint.

Once the adhesive and sealant has cured, it remains permanently elastic, making it ideal for expansion joints. This is particularly important for outdoor use to accommodate expansions and tensions in floor and wall coverings.

Whether acid rain, salt water, chlorinated water, or household cleaners, the product impresses with its high resistance and does not discolor. Dirt does not stick and can always be easily removed.

Due to its UV resistance, joint seals and adhesive spots do not become brittle or crumbly. Moreover, the adhesive and sealant withstands extreme cold down to -40 °C and heat up to +100 °C (briefly even up to +130 °C).

The product is resistant to mold and bacteria. Therefore, it is also suitable for use in humid-warm environmental conditions.

This adhesive and sealant is free of silicone, solvents, and contains no diisocyanates, which are often triggers for respiratory diseases.

The adhesive and sealant can be processed on both dry and wet surfaces and even directly underwater.

Adhesive and Sealant Based on MS Polymer

With its high initial adhesion, the product is suitable for wall and ceiling mounting of mirrors, curtain rails, lights, as well as heavy parts made of stone, concrete, glass, metal, wood, and plastic.

Once the adhesive and sealant has set, it remains permanently elastic, making it excellent for expansion joints. This is particularly important for outdoor use, to compensate for expansions and stresses in flooring and wall coverings, for example.

Whether it's acid rain, saltwater, chlorinated water, or household cleaners, the product impresses with high resistance and does not discolor. Dirt hardly sticks and can always be easily removed.

Thanks to UV resistance, joint sealings and adhesive spots do not become brittle or crumbly. Moreover, the adhesive and sealant is resistant to extreme cold down to -40 °C and heat up to +100 °C (briefly even up to +120 °C).

The product is resistant to mold and bacteria.

This adhesive and sealant is free of silicone, solvents, and contains no diisocyanates, which are often triggers for respiratory diseases.

Adheres and seals even directly under water

The adhesive and sealant can be conventionally applied on dry, but also on wet surfaces and even directly under water. It has been developed for installations and repairs on brick or concrete swimming pools, swimming pools, whether built-in pools or above-ground pools, as well as whirlpools, paddling pools, steel wall pools, garden ponds, aquariums, and similar applications.

Even without a surface treatment with adhesion primers, excellent adhesion is achieved. The product can be applied wet on wet, is overpaintable and compatible with paint.

After the adhesive and sealant has set, it remains permanently elastic, making it excellent for expansion joints. This is especially important for outdoor applications, to compensate for example, expansions and tensions of floor and wall coverings.

Whether it's acid rain weathering, saltwater, chlorinated water, or household cleaners, the product impresses with high resistance and does not discolor. Dirt practically does not stick to it and can always be removed effortlessly.

Due to the UV resistance, joint sealings and adhesive points do not become brittle or crumbly. In addition, the adhesive and sealant is resistant to extreme cold down to -40 °C and heat up to +100 °C (briefly even up to +130 °C).

The product is resistant to mold and bacteria. Therefore, it is also suitable for use under humid-warm environmental conditions.

This adhesive and sealant is free of silicone, solvents, and contains no diisocyanates, which are often triggers for respiratory diseases.

MS Polymer-Based Adhesive and Sealant

Even without surface treatment with adhesion primers, excellent adhesion is achieved. The product can be used wet-on-wet, is overpaintable and compatible with paint.

Once the adhesive and sealant has cured, it remains permanently elastic, making it ideal for expansion joints. This is particularly important for outdoor use to accommodate expansions and tensions in floor and wall coverings.

Whether acid rain, salt water, chlorinated water, or household cleaners, the product impresses with its high resistance and does not discolor. Dirt does not stick and can always be easily removed.

Due to its UV resistance, joint seals and adhesive spots do not become brittle or crumbly. Moreover, the adhesive and sealant withstands extreme cold down to -40 °C and heat up to +100 °C (briefly even up to +130 °C).

The product is resistant to mold and bacteria. Therefore, it is also suitable for use in humid-warm environmental conditions.

This adhesive and sealant is free of silicone, solvents, and contains no diisocyanates, which are often triggers for respiratory diseases.

The adhesive and sealant can be processed on both dry and wet surfaces and even directly underwater.