WIKO Klebetechnik Sp. z o.o.
Component A
- UFI: X319-VXQ7-PE9A-9T63
Danger
Hazard statements
- H225 Highly flammable liquid and vapour.
- H314 Causes severe skin burns and eye damage.
- H317 May cause an allergic skin reaction.
- H335 May cause respiratory irritation.
- H412 Harmful to aquatic life with long lasting effects.
Precautionary statements
- P101 If medical advice is needed, have product container or label at hand.
- P102 Keep out of reach of children.
- P280 Wear protective gloves.
- P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P405 Store locked up.
- P501 Dispose of contents/container in accordance with local/national regulation.
Hazard components for labelling
- Contains: Methyl methacrylate; Methyl 2-methylprop-2-enoate; Methyl 2-methylpropenoate; Methacrylic acid; 2-Methylpropenoic acid; p-Toluenesulfonyl chloride; alpha,alpha-Dimethylbenzyl hydroperoxide; Cumene hydroperoxide.
Component B
- UFI: RPE4-3453-MRK6-X9Y5
Danger
Hazard statements
- H225 Highly flammable liquid and vapour.
- H315 Causes skin irritation.
- H317 May cause an allergic skin reaction.
- H335 May cause respiratory irritation.
- H412 Harmful to aquatic life with long lasting effects.
Precautionary Statements
- Due to a technical limitation on the maximum text length, the extensive instructions cannot be fully displayed here. Missing information is available in the safety data sheet.
Adheres and seals even directly under water
The adhesive and sealant can be conventionally applied on dry, but also on wet surfaces and even directly under water. It has been developed for installations and repairs on brick or concrete swimming pools, swimming pools, whether built-in pools or above-ground pools, as well as whirlpools, paddling pools, steel wall pools, garden ponds, aquariums, and similar applications.
Even without a surface treatment with adhesion primers, excellent adhesion is achieved. The product can be applied wet on wet, is overpaintable and compatible with paint.
After the adhesive and sealant has set, it remains permanently elastic, making it excellent for expansion joints. This is especially important for outdoor applications, to compensate for example, expansions and tensions of floor and wall coverings.
Whether it's acid rain weathering, saltwater, chlorinated water, or household cleaners, the product impresses with high resistance and does not discolor. Dirt practically does not stick to it and can always be removed effortlessly.
Due to the UV resistance, joint sealings and adhesive points do not become brittle or crumbly. In addition, the adhesive and sealant is resistant to extreme cold down to -40 °C and heat up to +100 °C (briefly even up to +130 °C).
The product is resistant to mold and bacteria. Therefore, it is also suitable for use under humid-warm environmental conditions.
This adhesive and sealant is free of silicone, solvents, and contains no diisocyanates, which are often triggers for respiratory diseases.
Component A
- UFI: X319-VXQ7-PE9A-9T63
Danger
Hazard statements
- H225 Highly flammable liquid and vapour.
- H314 Causes severe skin burns and eye damage.
- H317 May cause an allergic skin reaction.
- H335 May cause respiratory irritation.
- H412 Harmful to aquatic life with long lasting effects.
Precautionary statements
- P101 If medical advice is needed, have product container or label at hand.
- P102 Keep out of reach of children.
- P280 Wear protective gloves.
- P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P405 Store locked up.
- P501 Dispose of contents/container in accordance with local/national regulation.
Hazard components for labelling
- Contains: Methyl methacrylate; Methyl 2-methylprop-2-enoate; Methyl 2-methylpropenoate; Methacrylic acid; 2-Methylpropenoic acid; p-Toluenesulfonyl chloride; alpha,alpha-Dimethylbenzyl hydroperoxide; Cumene hydroperoxide.
Component B
- UFI: RPE4-3453-MRK6-X9Y5
Danger
Hazard statements
- H225 Highly flammable liquid and vapour.
- H315 Causes skin irritation.
- H317 May cause an allergic skin reaction.
- H335 May cause respiratory irritation.
- H412 Harmful to aquatic life with long lasting effects.
Precautionary Statements
- Due to a technical limitation on the maximum text length, the extensive instructions cannot be fully displayed here. Missing information is available in the safety data sheet.
MS Polymer-Based Adhesive and Sealant
Even without surface treatment with adhesion primers, excellent adhesion is achieved. The product can be used wet-on-wet, is overpaintable and compatible with paint.
Once the adhesive and sealant has cured, it remains permanently elastic, making it ideal for expansion joints. This is particularly important for outdoor use to accommodate expansions and tensions in floor and wall coverings.
Whether acid rain, salt water, chlorinated water, or household cleaners, the product impresses with its high resistance and does not discolor. Dirt does not stick and can always be easily removed.
Due to its UV resistance, joint seals and adhesive spots do not become brittle or crumbly. Moreover, the adhesive and sealant withstands extreme cold down to -40 °C and heat up to +100 °C (briefly even up to +130 °C).
The product is resistant to mold and bacteria. Therefore, it is also suitable for use in humid-warm environmental conditions.
This adhesive and sealant is free of silicone, solvents, and contains no diisocyanates, which are often triggers for respiratory diseases.
The adhesive and sealant can be processed on both dry and wet surfaces and even directly underwater.
Adhesive (component A)
- Contains reaction product: bisphenol-A-(epichlorhydrin) epoxy resin (number average molecular weight ≤ 700); dibenzoylperoxid.
Unique Formula Identifier
- UFI: SS19-XX7E-4E99-KHUM
Warning
Hazard statements
- H315 Causes skin irritation.
- H317 May cause an allergic skin reaction.
- H319 Causes serious eye irritation.
- H410 Very toxic to aquatic life with long-lasting effects.
Precautionary statements
- P101 If medical advice is needed, have product container or label at hand.
- P102 Keep out of reach of children.
- P273 Avoid release to the environment.
- P280 Wear protective gloves/eye protection/face protection.
- P305+P338+P351 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P313+P333 If skin irritation or rash occurs: Get medical advice/attention.
- P313+P337 If eye irritation persists: Get medical advice/attention.
- P501 Dispose of contents/container in accordance with local/national regulation.
Special labelling
- EUH205 Contains epoxy constituents. May produce an allergic reaction.
Activator (component B)
- Contains methyl methacrylate; methacrylic acid.
Unique Formula Identifier
- UFI: KTW4-54MY-HRK9-CDHH
Danger
Hazard statements
- H225 Highly flammable liquid and vapour.
- H315 Causes skin irritation.
- H317 May cause an allergic skin reaction.
- H319 Causes serious eye irritation.
- H335 May cause respiratory irritation.
Precautionary statements
- Due to a technical limitation of the maximum text length, the extensive information cannot be presented in full at this point. Missing information is available in the material safety data sheet.
MS Polymer-Based Adhesive and Sealant
Even without surface treatment with adhesion primers, excellent adhesion is achieved. The product can be used wet-on-wet, is overpaintable and compatible with paint.
Once the adhesive and sealant has cured, it remains permanently elastic, making it ideal for expansion joints. This is particularly important for outdoor use to accommodate expansions and tensions in floor and wall coverings.
Whether acid rain, salt water, chlorinated water, or household cleaners, the product impresses with its high resistance and does not discolor. Dirt does not stick and can always be easily removed.
Due to its UV resistance, joint seals and adhesive spots do not become brittle or crumbly. Moreover, the adhesive and sealant withstands extreme cold down to -40 °C and heat up to +100 °C (briefly even up to +130 °C).
The product is resistant to mold and bacteria. Therefore, it is also suitable for use in humid-warm environmental conditions.
This adhesive and sealant is free of silicone, solvents, and contains no diisocyanates, which are often triggers for respiratory diseases.
The adhesive and sealant can be processed on both dry and wet surfaces and even directly underwater.