Bonding and sealing
Static mixing nozzles enable efficient and reliable mixing of...
Free from MDI, Isocyanates, and Diisocyanates
This PU adhesive and sealant has been specifically developed to be free from Methylene diphenyl diisocyanate (MDI), isocyanates, or diisocyanates, which are often identified as triggers for respiratory diseases.
Unique Formula Identifier
- UFI: REX9-WXG7-RE9N-KFGD
Warning
Hazard statements
- H317 May cause an allergic skin reaction.
Precautionary statements
- P101 If medical advice is needed, have product container or label at hand.
- P102 Keep out of reach of children.
- P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
- P272 Contaminated work clothing should not be allowed out of the workplace.
- P280 Wear protective gloves/protective clothing/respiratory protection/eye protection/protective footwear.
- P302+P352 IF ON SKIN: Wash with plenty of water.
- P333+P313 If skin irritation or rash occurs: Get medical advice/attention.
- P501 Dispose of contents/container in accordance with local/national regulations.
Hazard-determining components for labeling
- Contains: Trimethoxysilane.
Komponente A
- UFI: KN29-0X4D-6E97-7XP8
Achtung
Gefahrenhinweise
- H317 Kann allergische Hautreaktionen verursachen.
- H332 Gesundheitsschädlich bei Einatmen.
- H335 Kann die Atemwege reizen.
- H412 Schädlich für Wasserorganismen, mit langfristiger Wirkung.
Sicherheitshinweise
- P101 Ist ärztlicher Rat erforderlich, Verpackung oder Kennzeichnungsetikett bereithalten.
- P102 Darf nicht in die Hände von Kindern gelangen.
- P271 Nur im Freien oder in gut belüfteten Räumen verwenden.
- P280 Schutzhandschuhe/Schutzkleidung/Augenschutz/Gesichtsschutz tragen.
- P405 Unter Verschluss aufbewahren.
- P501 Inhalt/Behälter gemäß lokalen/nationalen Vorschriften der Entsorgung zuführen.
Besondere Kennzeichnung
- EUH204 Enthält Isocyanate. Kann allergische Reaktionen hervorrufen.
Gefahrbestimmende Komponenten zur Etikettierung
- Enthält: Hexamethylendiisocyanat, Oligomerisationsprodukt; 2-Oxepanon, Polymer mit 1,6-Diisocyanatohexan und 1,6-Hexandiol; Hexandisäure, Polymer mit 1,4-Butandiol, 1,6-Diisocyanatohexan, 2,2-Dimethyl-1,3-propandiol und 1,6-Hexandiol; Oligomere von HDI, Uretdion-Typ; Polyisocyanat (aliphatisch); Hexamethylendiisocyanat.
Komponente B
- UFI: VNX4-74HX-KRK7-YTC5
Gefahr
Gefahrenhinweise
- H319 Verursacht schwere Augenreizung.
Sicherheitshinweise
- P101 Ist ärztlicher Rat erforderlich, Verpackung oder Kennzeichnungsetikett bereithalten.
- P102 Darf nicht in die Hände von Kindern gelangen.
- P280 Schutzhandschuhe tragen.
- P305+P351+P338 BEI KONTAKT MIT DEN AUGEN: Einige Minuten lang behutsam mit Wasser ausspülen. Eventuell vorhandene Kontaktlinsen nach Möglichkeit entfernen. Weiter ausspülen.
- P337+P313 Bei anhaltender Augenreizung: Ärztlichen Rat einholen/ärztliche Hilfe hinzuziehen.
- P405 Unter Verschluss aufbewahren.
- P501 Inhalt/Behälter gemäß lokalen/nationalen Vorschriften der Entsorgung zuführen.
MS Polymer-Based Adhesive and Sealant
Even without surface treatment with adhesion primers, excellent adhesion is achieved. The product can be used wet-on-wet, is overpaintable and compatible with paint.
Once the adhesive and sealant has cured, it remains permanently elastic, making it ideal for expansion joints. This is particularly important for outdoor use to accommodate expansions and tensions in floor and wall coverings.
Whether acid rain, salt water, chlorinated water, or household cleaners, the product impresses with its high resistance and does not discolor. Dirt does not stick and can always be easily removed.
Due to its UV resistance, joint seals and adhesive spots do not become brittle or crumbly. Moreover, the adhesive and sealant withstands extreme cold down to -40 °C and heat up to +100 °C (briefly even up to +130 °C).
The product is resistant to mold and bacteria. Therefore, it is also suitable for use in humid-warm environmental conditions.
This adhesive and sealant is free of silicone, solvents, and contains no diisocyanates, which are often triggers for respiratory diseases.
The adhesive and sealant can be processed on both dry and wet surfaces and even directly underwater.
Heat-Resistant Adhesive and Sealant
The product's heat resistance ranges from -40 °C to +100 °C, and even up to +200 °C for short periods. This extends its application to heating and stove construction, as well as to metal parts that are bonded and then finished in a curing oven with a powder coating.
Excellent adhesion is achieved even without surface treatment with adhesion primers. The product can be applied wet-on-wet, is paintable, and compatible with coatings.
Once the adhesive and sealant has set, it remains permanently elastic, making it excellent for expansion joints. This is especially important for outdoor use, for example, to compensate for expansions and tensions of floor and wall coverings.
Whether it's acid rain weathering, saltwater, chlorinated water, or household cleaners, the product impresses with its high resistance and does not discolor. Dirt practically does not stick to it and can always be easily removed.
Due to its UV resistance, joint sealants and adhesive spots do not become brittle or crumbly.
The product is resistant to mold and bacteria. Therefore, it is also suitable for use under humid-warm environmental conditions.
This adhesive and sealant is free from silicone, solvents, and contains no diisocyanates, which are often triggers for respiratory diseases.
MS Polymer-Based Adhesive and Sealant
Even without surface treatment with adhesion primers, excellent adhesion is achieved. The product can be used wet-on-wet, is overpaintable and compatible with paint.
Once the adhesive and sealant has cured, it remains permanently elastic, making it ideal for expansion joints. This is particularly important for outdoor use to accommodate expansions and tensions in floor and wall coverings.
Whether acid rain, salt water, chlorinated water, or household cleaners, the product impresses with its high resistance and does not discolor. Dirt does not stick and can always be easily removed.
Due to its UV resistance, joint seals and adhesive spots do not become brittle or crumbly. Moreover, the adhesive and sealant withstands extreme cold down to -40 °C and heat up to +100 °C (briefly even up to +130 °C).
The product is resistant to mold and bacteria. Therefore, it is also suitable for use in humid-warm environmental conditions.
This adhesive and sealant is free of silicone, solvents, and contains no diisocyanates, which are often triggers for respiratory diseases.
The adhesive and sealant can be processed on both dry and wet surfaces and even directly underwater.
Unique Formula Identifier
- UFI: 26P8-MX1T-SE9G-9F5W
Danger
Hazard statements
- H317 May cause an allergic skin reaction.
- H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled.
Precautionary statements
- P101 If medical advice is needed, have product container or label at hand.
- P102 Keep out of reach of children.
- P261 Avoid breathing vapours.
- P284 In case of inadequate ventilation wear respiratory protection.
- P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
- P311+P342 If experiencing respiratory symptoms: Call a POISON CENTER/doctor.
- P313+P333 If skin irritation or rash occurs: Get medical advice/attention.
- P305+338+351 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P501 Dispose of contents/container in accordance with local/national regulation.
Special labelling
- EUH204 Contains isocyanates. May produce an allergic reaction.
Adhesive (component A)
- Contains reaction product: bisphenol-A-(epichlorhydrin) epoxy resin (number average molecular weight ≤ 700); dibenzoylperoxid.
Unique Formula Identifier
- UFI: SS19-XX7E-4E99-KHUM
Warning
Hazard statements
- H315 Causes skin irritation.
- H317 May cause an allergic skin reaction.
- H319 Causes serious eye irritation.
- H410 Very toxic to aquatic life with long-lasting effects.
Precautionary statements
- P101 If medical advice is needed, have product container or label at hand.
- P102 Keep out of reach of children.
- P273 Avoid release to the environment.
- P280 Wear protective gloves/eye protection/face protection.
- P305+P338+P351 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P313+P333 If skin irritation or rash occurs: Get medical advice/attention.
- P313+P337 If eye irritation persists: Get medical advice/attention.
- P501 Dispose of contents/container in accordance with local/national regulation.
Special labelling
- EUH205 Contains epoxy constituents. May produce an allergic reaction.
Activator (component B)
- Contains methyl methacrylate; methacrylic acid.
Unique Formula Identifier
- UFI: KTW4-54MY-HRK9-CDHH
Danger
Hazard statements
- H225 Highly flammable liquid and vapour.
- H315 Causes skin irritation.
- H317 May cause an allergic skin reaction.
- H319 Causes serious eye irritation.
- H335 May cause respiratory irritation.
Precautionary statements
- Due to a technical limitation of the maximum text length, the extensive information cannot be presented in full at this point. Missing information is available in the material safety data sheet.
MS Polymer-Based Adhesive and Sealant
Even without surface treatment with adhesion primers, excellent adhesion is achieved. The product can be used wet-on-wet, is overpaintable and compatible with paint.
Once the adhesive and sealant has cured, it remains permanently elastic, making it ideal for expansion joints. This is particularly important for outdoor use to accommodate expansions and tensions in floor and wall coverings.
Whether acid rain, salt water, chlorinated water, or household cleaners, the product impresses with its high resistance and does not discolor. Dirt does not stick and can always be easily removed.
Due to its UV resistance, joint seals and adhesive spots do not become brittle or crumbly. Moreover, the adhesive and sealant withstands extreme cold down to -40 °C and heat up to +100 °C (briefly even up to +130 °C).
The product is resistant to mold and bacteria. Therefore, it is also suitable for use in humid-warm environmental conditions.
This adhesive and sealant is free of silicone, solvents, and contains no diisocyanates, which are often triggers for respiratory diseases.
The adhesive and sealant can be processed on both dry and wet surfaces and even directly underwater.
MS Polymer-Based Adhesive and Sealant
Even without surface treatment with adhesion primers, excellent adhesion is achieved. The product can be used wet-on-wet, is overpaintable and compatible with paint.
Once the adhesive and sealant has cured, it remains permanently elastic, making it ideal for expansion joints. This is particularly important for outdoor use to accommodate expansions and tensions in floor and wall coverings.
Whether acid rain, salt water, chlorinated water, or household cleaners, the product impresses with its high resistance and does not discolor. Dirt does not stick and can always be easily removed.
Due to its UV resistance, joint seals and adhesive spots do not become brittle or crumbly. Moreover, the adhesive and sealant withstands extreme cold down to -40 °C and heat up to +100 °C (briefly even up to +130 °C).
The product is resistant to mold and bacteria. Therefore, it is also suitable for use in humid-warm environmental conditions.
This adhesive and sealant is free of silicone, solvents, and contains no diisocyanates, which are often triggers for respiratory diseases.
The adhesive and sealant can be processed on both dry and wet surfaces and even directly underwater.