Adhesive and Sealant Based on MS Polymer
With its high initial adhesion, the product is suitable for wall and ceiling mounting of mirrors, curtain rails, lights, as well as heavy parts made of stone, concrete, glass, metal, wood, and plastic.
Once the adhesive and sealant has set, it remains permanently elastic, making it excellent for expansion joints. This is particularly important for outdoor use, to compensate for expansions and stresses in flooring and wall coverings, for example.
Whether it's acid rain, saltwater, chlorinated water, or household cleaners, the product impresses with high resistance and does not discolor. Dirt hardly sticks and can always be easily removed.
Thanks to UV resistance, joint sealings and adhesive spots do not become brittle or crumbly. Moreover, the adhesive and sealant is resistant to extreme cold down to -40 °C and heat up to +100 °C (briefly even up to +120 °C).
The product is resistant to mold and bacteria.
This adhesive and sealant is free of silicone, solvents, and contains no diisocyanates, which are often triggers for respiratory diseases.
MS Polymer-Based Adhesive and Sealant
Even without surface treatment with adhesion primers, excellent adhesion is achieved. The product can be used wet-on-wet, is overpaintable and compatible with paint.
Once the adhesive and sealant has cured, it remains permanently elastic, making it ideal for expansion joints. This is particularly important for outdoor use to accommodate expansions and tensions in floor and wall coverings.
Whether acid rain, salt water, chlorinated water, or household cleaners, the product impresses with its high resistance and does not discolor. Dirt does not stick and can always be easily removed.
Due to its UV resistance, joint seals and adhesive spots do not become brittle or crumbly. Moreover, the adhesive and sealant withstands extreme cold down to -40 °C and heat up to +100 °C (briefly even up to +130 °C).
The product is resistant to mold and bacteria. Therefore, it is also suitable for use in humid-warm environmental conditions.
This adhesive and sealant is free of silicone, solvents, and contains no diisocyanates, which are often triggers for respiratory diseases.
The adhesive and sealant can be processed on both dry and wet surfaces and even directly underwater.
Danger
Hazard statements
- H317 May cause an allergic skin reaction.
- H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled.
Precautionary statements
- P101 If medical advice is needed, have product container or label at hand.
- P102 Keep out of reach of children.
- P261 Avoid breathing vapours.
- P284 In case of inadequate ventilation wear respiratory protection.
- P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
- P311+P342 If experiencing respiratory symptoms: Call a POISON CENTER/doctor.
- P313+P333 If skin irritation or rash occurs: Get medical advice/attention.
- P305+338+351 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P501 Dispose of contents/container in accordance with local/national regulation.
Special labelling
- EUH204 Contains isocyanates. May produce an allergic reaction.
Adheres and seals even directly under water
The adhesive and sealant can be conventionally applied on dry, but also on wet surfaces and even directly under water. It has been developed for installations and repairs on brick or concrete swimming pools, swimming pools, whether built-in pools or above-ground pools, as well as whirlpools, paddling pools, steel wall pools, garden ponds, aquariums, and similar applications.
Even without a surface treatment with adhesion primers, excellent adhesion is achieved. The product can be applied wet on wet, is overpaintable and compatible with paint.
After the adhesive and sealant has set, it remains permanently elastic, making it excellent for expansion joints. This is especially important for outdoor applications, to compensate for example, expansions and tensions of floor and wall coverings.
Whether it's acid rain weathering, saltwater, chlorinated water, or household cleaners, the product impresses with high resistance and does not discolor. Dirt practically does not stick to it and can always be removed effortlessly.
Due to the UV resistance, joint sealings and adhesive points do not become brittle or crumbly. In addition, the adhesive and sealant is resistant to extreme cold down to -40 °C and heat up to +100 °C (briefly even up to +130 °C).
The product is resistant to mold and bacteria. Therefore, it is also suitable for use under humid-warm environmental conditions.
This adhesive and sealant is free of silicone, solvents, and contains no diisocyanates, which are often triggers for respiratory diseases.