Everglue dispensing gun metal version for 2K cartridge 200 ml mixing ratio 1:1 manual

Manual 2K metal dispensing gun for 200 ml cartridges with a mixing ratio of 1:1

Two-component adhesives can only achieve their full performance potential if both components are dispensed in the specified mixing ratio and thoroughly mixed together. The manual metal 2-component dispensing gun enables the even and controlled application of 2-component adhesives from 200 ml twin cartridges with a mixing ratio of 1:1.

Thanks to the uniform feed rate, both adhesive components are dispensed from the cartridge simultaneously. This helps to maintain a consistent mixing ratio and reduces the risk of incorrect mixing. When used with a suitable mixing nozzle, the two components are blended homogeneously and can then be applied directly and cleanly to the bonding surface.

Consistent dispensing for reliable bonding results

With two-component adhesives, the correct ratio of resin to hardener is crucial. Deviations in dosing can result in the adhesive not curing completely or failing to achieve the intended strength. The manual dispensing gun ensures that both components are dispensed evenly from the dual cartridge.

The amount of adhesive dispensed can be controlled using the hand lever and adjusted to suit the specific application. This makes the dispensing gun suitable for both spot bonding and longer beads of adhesive, as well as for repetitive assembly work.

Sturdy metal construction for professional use

The sturdy metal frame ensures the 200 ml cartridge is held securely in place and enables reliable force transmission to the two cartridge pistons. Its robust construction makes the dispensing gun particularly suitable for regular use in workshops, the trades, manufacturing and industry.

Thanks to its manual operation, it requires neither a mains power supply nor a compressed air supply. The dispensing gun can therefore be used flexibly at different workstations and for mobile repair and assembly work.

Simple and user-friendly operation

The dispensing gun is impressive for its ease of use. The appropriate 200 ml twin cartridge is inserted into the metal frame and secured in place. Once the cartridge cap has been removed, a suitable mixing nozzle can be fitted.

When the hand lever is operated, both components are fed evenly into the mixing nozzle. There, the two adhesive components are mixed automatically. The fully mixed adhesive can then be applied directly to the component or the prepared bonding surface.

Advantages of the manual 2K dispensing gun

• Simultaneous dispensing of both adhesive components
• Consistent dosage at a mixing ratio of 1:1
• Suitable for 200-ml twin cartridges
• Sturdy and durable metal frame
• Controlled and even application of adhesive
• Simple and user-friendly operation
• No mains power or compressed air supply required
• Versatile enough for use in both fixed and mobile working environments
• Suitable for professional and industrial use

A wide range of uses

The manual dispensing gun is suitable for applying a wide range of two-component adhesive systems in 200 ml cartridges. It can be used in a variety of industrial, trade and technical sectors.

• Vehicle and Bodywork Construction
• Mechanical and Plant Engineering
• Metalworking
• Plastics processing
• Assembly and Manufacturing
• Repair and Maintenance
• Model and prototype construction
• Workshop and servicing work

How to use the dispensing gun

1. Select a suitable 200 ml twin cartridge with a mixing ratio of 1:1.
2. Insert the cartridge into the metal frame of the dispensing gun.
3. Remove the cartridge cap.
4. Fit a mixing nozzle suitable for the adhesive.
5. Slowly operate the hand lever until both components are being dispensed evenly.
6. Discard a small initial quantity to ensure thorough mixing.
7. Apply the adhesive evenly to the prepared bonding surface.

To achieve the best possible bonding results, the application, safety and curing instructions for the specific two-component adhesive being used must be followed. The cartridge size, cartridge design and mixing ratio must be compatible with the dispensing gun.

Product features

• Product type: manual dispensing gun for two-component adhesives
• Material: metal frame
• Colour: Green/Black
• Suitable for: 200 ml twin cartridges
• Mixing ratio: 1:1
• Operation: manual
• Areas of application: trades, workshops, manufacturing and industry

Reliable application of two-component adhesives

The manual 2K metal dispensing gun is the ideal solution for users who wish to apply 200 ml twin cartridges with a 1:1 mixing ratio in a controlled and consistent manner. Its robust construction, ease of use and consistent dispensing of both components make it a reliable tool for professional bonding, assembly and repair work.