Everglue Anaerobic Threadlocker, medium strength, normally removable, for threads up to M80, 22g dispenser bottle

Everglue medium-strength threadlocker for threads up to M80

The Everglue medium-strength threadlocker has been specially developed to reliably secure and seal threaded pipe connections up to M80 (R3″). This anaerobic threadlocker cures on contact with metal in the absence of atmospheric oxygen and provides a vibration-resistant connection. Ideal for applications such as sprinkler systems, gas pipework systems and other industrial applications where long-term security and easy disassembly are required.

A wide range of applications

The Everglue Threadlocker provides reliable connections across a wide range of sectors:

• Sprinkler systems: Ideal for sealing and securing joints in sprinkler systems.
• Gas pipework systems: Reliable sealing and securing of pipe fittings in accordance with DVGW DIN EN 751-1 Class H.
• Building services: For heating, ventilation and air-conditioning systems, as well as plumbing installations.
• Mechanical engineering: Secure bolted connections in machinery and plant with thread diameters up to M80.
• Industrial pipework systems: Ideal for cylindrical-tapered threaded connections in critical areas.

Outstanding product features

• High resistance to vibration: A secure hold, even during severe vibrations.
• Increased temperature resistance: Suitable for use across a wide temperature range from -55 °C to +180 °C.
• Fast curing: The bond sets in just 10–15 minutes, and full strength is achieved after 1–3 hours.
• Maximum thread diameter: Suitable for connections up to M80 (R3″).
• Environmentally friendly: PFAS-free and without hazardous substance labelling.
• Durability: Shelf life of up to 24 months with improved storage stability.
• Viscosity: 20,000–40,000 mPa·s at +25 °C.

Easy to use for optimum results

The application of the Everglue Threadlocker It is simple and efficient. Clean the surfaces thoroughly with a suitable cleaner to remove grease, oil and dirt. Apply the adhesive evenly to the threaded surfaces. Assemble the parts and allow the joint to cure under normal conditions. For optimum results, the application temperature should be between +10 °C and +40 °C. Once fully cured, the product offers high resistance to chemicals, UV light and water.