Universal Polymer Sealant
Everglue Technicoat is a one-component universal sealant for horizontal and vertical surfaces. It is particularly suitable as a sealant against moisture in cracks and breaks in masonry, both indoors and outdoors, for waterproof sealing of skylights, light domes, roof eaves, pipe junctions, external vents, wall and chimney connections, as protection for open areas in wood constructions, and for durable adhesions of all kinds. Everglue Technicoat is not suitable for sealing areas that are permanently submerged underwater. It exhibits very good properties when used on steel plates (including painted ones), brass, glass, polyester, wood, ceramics, aluminum, concrete, styrofoam, and PMMA (plexiglass). After curing, the seal remains flexibly resilient.
Product Features
- waterproof
- low viscosity
- ready for immediate use
- moisture-curing
- short curing times
- good gap bridging
- can be painted over
- cures at room temperature
- easy to apply at temperatures from +5 °C to +40 °C
- temperature resistant from -40 °C to +90 °C
- excellent adhesion to many substrates
- adhesion also to old and moist surfaces
- excellent resistance to chemical influences
- no subsequent tackiness of the surface
- good UV and weather resistance
- water vapor permeable
- solvent-free
- isocyanate-free
PDF
Product Safety Information
Manufacturer Information:
Colour: |
|
Production origin: |
|
Content: |
80,00 g
|
Base: |
Silane-terminated polymer |
Viscosity: |
~ 10-30 Pa·s |
Density: |
1.4 g/ml |
Working temperature: |
+5 °C to +40 °C |
Curing speed: |
~ 3 h (1 mm layer thickness) |
Temperature resistance: |
-40 °C to +90 °C |
Hardness: |
35 Shore A (ISO 868) |
Elongation at break: |
300-400 % (ISO 37 rod 1) |
Volume change: |
< 3 % (ISO 10563) |
Breaking strength: |
1.4 MPa (N/mm², ISO 37 rod 1) |
Breaking strength (100 %): |
0.7 MPa (N/mm², ISO 37 rod 1) |
Water permeability: |
waterproof (DIN 1048) |
Payloads: |
P2 (low fluctuation) |
There are no reviews yet.