The 2K Adhesive for Extreme Loads
The Everglue 2K MMA Everbond 2001 is the top choice among high-performance adhesives, meeting even the highest demands where standard adhesives fall short. This adhesive is perfect for demanding applications that require exceptional strength and durability, where traditional adhesives simply cannot deliver.
Versatile Applications
With Everglue 2K MMA Everbond 2001, a variety of materials such as metal, wood, ceramic, and hard plastic can be bonded securely and reliably. The adhesive is ideal for quick bonding of different materials and allows for surface processing and painting after full curing.
Product Highlights
- Outstanding impact, peel, and tensile shear strength
- Weather-resistant and withstands mechanical stresses
- Fast curing time
- Minimal surface preparation required
- Temperature resistance: permanent up to +120°C, short-term up to +140°C
Application Examples
Bodywork and Exterior: bumpers, spoilers, radiators, side mirrors, body panels, windshields, door windows, fiberglass parts, door panels, tail and front lighting, reinforcement and installation of floor panels, roof elements, grilles, front and rear end caps, advertisements, plastic wheel covers, bumper corners, and more.
Easy Application
-
Preparation: Surfaces to be bonded should be clean, oil-free, and grease-free. Roughening the surface increases strength.
-
Application: Mix the material until an even color is achieved. Apply Everglue 2K MMA Everbond 2001 and join the parts.
-
Curing: Hand strength is achieved in about 60 minutes; full curing occurs after 12 hours.
-
Storage: Close the cartridge after use. Do not process below +5°C.
PDF
Product Safety Information
Manufacturer Information:
Big Difference GmbH & Co. KG
Am Hasselt 20c
Schleswig-Holstein
Bad Bramstedt, Deutschland, 24576
info@big-difference.com https://big-difference.com/
| Item information |
Value |
| Colour: |
|
| Production origin: |
|
| Content: |
50,00 g
|
| Base: |
Methyl methacrylate |
| Viscosity: |
150,000-200,000 mPa·s at +20 °C (Brookfield) |
| Density: |
~ 0.97 g/ml |
| Shelf life: |
12 months |
| Shrinkage: |
5 % |
| Temperature resistance: |
-55 °C to +120 °C |
| Hardness: |
75 Shore D |
| Gap filling capacity: |
1-10 mm |
| Pot life: |
5-7 min |
| Fixing time: |
10-12 min |