Accelerates the Work with CA Glue
The activator is a curing accelerator for all cyanoacrylate-based super glues. The aerosol from the spray can was designed for rapid curing of large glue layers, bonding inactive materials, or under otherwise unfavorable processing conditions, such as dry air or cold. The activator is suitable for use with Styrofoam and Styrodur, as well as all hard foams used in model making, such as Arcel, Elapor, Solidpor, Hypodur, Z-Foam, Depron, Selitron, EPO, EPP, and EPS.
Applications
- high-viscosity cyanoacrylate adhesives
- large adhesive layers
- absorbent and porous surfaces
- alkaline surfaces (galvanized metal parts etc.)
- low temperatures
- low humidity (< 30%)
Application
The recommended processing temperature is +10 °C to +30 °C. Shake the can briefly before use. To achieve a smooth surface, maintain a sufficient spraying distance of about 30 cm. There are two application options. Before gluing: Apply the spray on one side, let it air briefly, and apply the super glue to the untreated surface. Then quickly join the parts together and let the glue cure. After gluing: Spray the glue directly and let it cure.
PDF
